A washing machine which is not properly draining can be a great inconvenience, and it causes clammy clothes, possible water destruction, and even mould growth. Luckily, a number of drainage issues may be avoided or immediately fixed through simple maintenance and detail-oriented work.
For Service Please
Call : +91 8870708883
Common Causes of Drainage Problems
1. Blockage In Drain Hose: A blockage in the drain hose might happen due to lint, debris, or some small-sized clothing items, that do not allow water to come out of the machine.
2. Kinked or Bent Hose: These are hoses which are compressed or twisted, resulting in a restricted flow of water.
3. Clogged Pump Filter: The filter that surrounds the pump may fill up with junk after a long period, leading to clogging and restricted drain.
4. The Faulty Lid Switch: On the top loader washer, it is important to note that when the switch on the lid is faulty, then the washer might be unable to drain or spin.
5. Poor Drain Hose Positioning: When the drain hose is arranged too low, then water will siphon before the time it is supposed to do so.
For Service Please
Call : +91 8870708883
Preventative Measures
Clean and Check Drain Hose: Examine the drain hose regularly and make sure that it is not covered and that no parts of it are kinked.
Clean the Pump Filter: You should take the steps shown in your machines manual on how to remove and clean the pump filter.
Proper Installation: Drain hose may have to be installed at a higher level usually above the level of water in the washer to avoid siphoning.
Do Not Overload: Overloading may cause stress on the motor and failure on the drainage.
Right Detergent: Too much detergent or the wrong type of detergent can produce too many suds in the way of drainage.
For Service Please
Call : +91 8870708883
Troubleshooting Tips
Do a Master reset: Pull the plug out of a washer approximately one minute and put it back in. This may help restart the controls in the machine.
Check on Lid Switch Make sure it is working well, particularly where there is no rotation or drainage of the machine.
Examine the Drain Hose and Pump: Check the drain hose and the pump in case there may be some blockage or other items which are preventing the water to drain.
Clean Filter: In some machines there is a filter that captures the debris; cleaning the filter can get back the normal functioning of the drainage.
For Service Please
Call : +91 8870708883
Maintenance Tips
After Use leave the Door Open: This will enable the moisture to dry up, thus avoiding growth of mold and mildew.
Carry out Regular Cleaning Cycles: clean the drum and hoses using washing machine cleaners or mixing some vinegar and baking soda.
Leak checks: Always ensure that hoses and connections are maintained by frequently checking them out to see if they are in good condition or there are leaks.
When to Call a Professional
In case you have performed the above steps and your washing machine is still not draining well, it may be high time you get a professional technician. Any long-lasting problems might signify something wrong with the pump, motor, or internal wiring, which need special solutions. Call +91 8870708883 and book your service now!